Comparative in vitro toxicological effects of water-soluble and insoluble components of atmospheric PM2.5 on human lung cells.

Fine particulates in city air significantly impact human health, but the hazardous compositional mechanisms are still unclear. Besides the toxicity of environmental PM2.5 to in vitro human lung epithelial cells (A549), the independent cytotoxicity of PM2.5-bound water-soluble (WS-PM2.5) and water-insoluble (WIS-PM2.5) fractions were also compared by cell viability, oxidative stress (reactive oxygen species, ROS), and inflammatory injury (IL-6 and TNF-α). The cytotoxicity of PM2.5 varied significantly by sampling season and place, with degrees greater in winter and spring than in summer and autumn, related to corresponding trend of air PM2.5 level, and also higher in industrial than urban site, although their PM2.5 pollution levels were comparable. The PM2.5 bound metals (Ni, Cr, Fe, and Mn) may contribute to cellular injury. Both WS-PM2.5 and WIS-PM2.5 posed significant cytotoxicity, that WS-PM2.5 was more harmful than WIS-PM2.5 in terms of decreasing cell viability and increasing inflammatory cytokines production. In particular, industrial samples were usually more toxic than urban samples, and those from summer were generally less toxic than other seasons. Hence, in order to mitigate the health risks of PM2.5 pollution, the crucial targets might be components of heavy metals and soluble fractions, and sources in industrial areas, especially during the cold seasons.

Super capacity of ligand-engineered biochar for sorption of malachite green dye: key role of functional moieties and mesoporous structure.

This study synthesized a new thiomalic acid-modified rice husk biochar (TMA-BC) as a versatile and eco-friendly sorbent. After undergoing chemical treatments, the mercerized rice husk biochar (NaOH-BC) and TMA-BC samples showed higher BET surface area values of 277.1 m2/g and 305.8 m2/g, respectively, compared to the pristine biochar (BC) sample, which had a surface area of 234.2 m2/g. In batch adsorption experiments, it was found that the highest removal efficiency for malachite green (MG) was achieved with TMA-BC, reaching 96.4%, while NaOH-BC and BC exhibited removal efficiencies of 38.6% and 27.9%, respectively, at pH 8. The engineered TMA-BC exhibited a super adsorption capacity of 104.17 mg/g for MG dye at pH 8.0 and 25 °C with a dosage of 2 g/L. The SEM, TEM, XPS, and FTIR spectroscopy analyses were performed to examine mesoporous features and successful TMA-BC carboxylic and thiol functional groups grafting on biochar. Electrostatic forces, such as π - π interactions, hydrogen bonding, and pore intrusion, were identified as key factors in the sorption of MG dye. As compared to single-solution adsorption experiments, the binary solution experiments performed at optimized dosages of undesired ions, such as humic acid, sodium dodecyl sulfate surfactant, NaCl, and NaSCN, reflected an increase in MG dye removal of 2.8%, 8.7%, 5.4%, and 12.7%, respectively, which was attributed to unique mesoporous features and grafted functional groups of TMA-BC. Furthermore, the TMA-BC showed promising reusability up to three cycles. Our study indicates that mediocre biochar modified with TMA can provide an eco-friendly and cost-effective alternative to commercially accessible adsorbents.

Effects of polypropylene microplastics on carbon dioxide dynamics in intertidal mangrove sediments.

Microplastics (MPs) in soil can influence CO2 dynamics by altering organic carbon (OC) and microbial composition. Nevertheless, the fluctuation of CO2 response attributed to MPs in mangrove sediments is unclear. This study explores the impact of micro-sized polypropylene (mPP) particles on the carbon dynamics of intertidal mangrove sediments. In the high-tide level sediment, after 28 days, the cumulative CO2 levels for varying mPP dosages were as follows: 496.86 ± 2.07, 430.38 ± 3.84 and 447.09 ± 1.72 mg kg-1 for 0.1%, 1% and 10% (w/w) mPP, respectively. The CO2 emissions were found to be increased with a 0.1% (w/w) mPP level and decreased with 1% and 10% (w/w) mPP at high-tide level sediment, suggesting a tide level-specific dose dependence of the CO2 emission pattern in mangrove sediments. Overall, results indicated that the presence of mPP in mangrove sediments would potentially affect intertidal total CO2 storage under given experimental conditions.

Trends and social aspects in the management and conversion of agricultural residues into valuable resources: A comprehensive approach to counter environmental degradation, food security, and climate change.

The circular economy is essential as it encourages the reuse and recycling of resources while reducing waste, which ultimately helps to reduce environmental pollution and boosts economic efficiency. The current review highlights the management of agricultural and livestock residues and their conversion into valuable resources to combat environmental degradation and improve social well-being. The current trends in converting agricultural residues into useful resources emphasize the social benefits of waste management and conversion. It also emphasizes how waste conversion can reduce environmental degradation and enhance food security. Using agricultural residues can increase soil health and agricultural output while reducing pollution, greenhouse gas emissions, and resource depletion. Promoting sustainable waste-to-resource conversion processes requires a combination of strategies that address technical, economic, social, and environmental aspects. These multiple strategies are highlighted along with prospects and considerations.

Earlier Return to Sports, Reduced Donor-Site Morbidity with Doubled Peroneus Longus Versus Quadrupled Hamstring Tendon Autograft in ACL Reconstruction.

Background: Graft choice for anterior cruciate ligament reconstruction (ACLR) has been evolving. The peroneus longus tendon (PLT) has been seen as a suitable choice for ACLR, providing comparable results to those of hamstring tendon (HT) autograft, but its clinical relevance in terms of return to sports, to our knowledge, has not been studied. Methods: Two hundred and thirty-two patients who sustained an isolated ACL injury were enrolled and underwent ACLR using doubled PLT autograft or quadrupled HT autograft; 158 were followed for 24 months. Functional scores (International Knee Documentation Committee [IKDC] and Tegner-Lysholm scores) were assessed preoperatively and at 3,6, 12, and 24 months postoperatively. Graft diameter and graft harvesting time were measured intraoperatively. Donor-site morbidity was evaluated using subjective evaluation. Time to return to sports in both groups was compared. Results: The mean diameter of PLT autograft was significantly larger than that of HT autograft, and the mean graft-harvesting time was less (p < 0.001). Patients in the PLT group returned to sports a mean of 34 days earlier than those in the HT group (p < 0.001) and had a lower rate of donor-site morbidity and, at 6 months, better patient-reported outcomes at the knee (p < 0.001). There were no significant differences between the groups in the rate of graft rupture or in IKDC and Tegner-Lysholm scores at the 24-month follow-up. Conclusions: PLT is a suitable autograft for ACLR in terms of graft diameter and graft-harvesting time and may offer athletes an earlier return to sports related to better outcomes at 6 months of follow-up. HT autograft was associated with increased thigh weakness. Both grafts, however, performed similarly at 24 months postoperatively. Level of Evidence: Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.

Effects of biodegradable and conventional microplastics on the intestine, intestinal community composition, and metabolic levels in tilapia (Oreochromis mossambicus).

Despite growing interest in conventional microplastics (CMPs) and their toxicological effects on aquatic species, little is known about biodegradable microplastics (BMPs) and their corresponding implications for aquatic life. Here, tilapia (Oreochromis mossambicus) were semi-statically exposed for 14 days to the bio-based plastic polylactic acid (PLA, 100 µg/L, 2.52 ± 0.46 µm) and the petroleum-based plastic polyvinyl chloride (PVC, 100 µg/L, 1.58 ± 0.36 µm). The results showed that ingesting the above two types of microplastics (MPs) led to oxidative stress in the fish gut, and damage to gut tissues and organelles, and PLA resulted in more obvious gut tissue edema than PVC. Furthermore, PLA caused increased levels of gut microbiota dysbiosis and a decrease in the abundance of the genus Cetobacterium, which is linked to vitamin B-12 synthesis, whereas an opposite relationship was observed on PVC. Metabolomic analysis indicated that PVC caused a significant down-regulation of orotic acid, co-metabolite of folic acid with vitamin B-12, while PLA did not affect orotic acid, which may lead to the accumulation of folic acid in fish. The joint analysis found that MPs disturbed gut metabolism homeostasis, implying that abnormal gut microbiota metabolites may be a key mechanism for MPs to induce tissue damage and oxidative stress in the gut. Overall, this study systematically illustrates the differential toxic effects of BMPs and CMPs on tilapia through gut microbiota and metabolite interactions, which will contribute to assessing the risks of BMPs to organismal health.

Assessment of meteorological and air quality drivers of elevated ambient ozone in Beijing via machine learning approach.

Over the past few years, surface ozone (O3) pollution has dominated China's air pollution as particulate matter has decreased. In Beijing, the annual average concentrations of ground-level O3 from 2015 to 2020 regularly increased from 57.32 to 62.72 µg/m3, showing a change of almost 9.4%, with a 1.6% per year increase. The meteorological factors are the primary influencer of elevated O3 levels; however, their importance and heterogeneity of variables remain rarely understood. In this study, we used 13 meteorological factors and 6 air quality (AQ) parameters to estimate their influencing score using the random forest (RF) algorithm to explain and predict ambient O3. Among the meteorological variables and overall, both land surface temperature and temperature at 2 m from the surface emerged as the most influential factors, while NO2 stood out as the highest influencing factor from the AQ parameters. Indeed, it is crucial and imperative to reduce the temperature caused by climate change in order to effectively control ambient O3 levels in Beijing. Overall, meteorological factors alone exhibited a higher coefficient of determination (R2) value of 0.80, compared with AQ variables of 0.58, for the post-lockdown period. In addition, we calculated the number of days O3 concentration levels exceeded the WHO standard and newly proposed peak-season maximum daily 8-h average (MDA8) O3 guideline for Beijing. The exceedance number of days from the WHO standard of MDA8 ambient O3 was observed to be the highest in June, and each studied year crossed peak season guidelines by almost 2 times margin. This study demonstrates the contributions of meteorological variables and AQ parameters in surging ambient O3 and highlights the importance of future research toward devising an optimum strategy to combat growing O3 pollution in urban areas.

Heterogeneous aggregation between microplastics and microalgae: May provide new insights for microplastics removal.

Existing studies have shown that microplastics (MPs) as artificial surfaces can be colonized by plankton microorganisms. However, systematic research on exploring the aggregation formation process of MPs and microalgae is still lacking and particularly the influencing factors of aggregation remain to be elucidated. Therefore, this study investigated the heterogeneous aggregation process between various microalgal species (i.e., Chlorella vulgaris, Scenedesmus obliquus, Tetraselmis subcordiformis, Chaetoceros müelleri and Streptococcus westermani) and MPs (i.e., mPS and mPLA) with different sizes (i.e., 74 µm and 613 µm), concentrations (i.e., 0.1 g/L, 1 g/L and 2 g/L) and shapes (i.e., the particle and sheet). The results showed that microalgae can first attach to the holes or protrusions of MPs and highly accumulate in the local region, and then multi-layer aggregation can be formed subsequently. The aggregation degree between MPs and microalgae was closely related to the MPs shape and size, and was less related to the MPs concentration. The aggregation speed of small-sized MPs (e.g., 74 µm) was faster than the large-sized ones (e.g., 613 µm). The MPs in a shape of sheet were more obvious than those in particle on their aggregation with microalgae. The density of aggregates was increased compared with pristine MPs, which is related to the cell density and cell number of attached microalgae. For the same type of MPs, the aggregation degree for the tested microalgae was as follows: Scenedesmus obliquus > C. vulgaris > T. subcordiformis > C. müelleri > S. westermani. Meanwhile, MPs inhibited cell growth of microalgae, particularly under the circumstance of their aggregation, by limiting the gas and mass transfer between microalgal cells and the extracellular environment. The heterogeneous aggregation of MPs and microalgae may provide new ideas for treatment and controlling of MPs in the environment.

Microplastics leachate may play a more important role than microplastics in inhibiting microalga Chlorella vulgaris growth at cellular and molecular levels.

The leaching of microplastics (MPs) additives and their negative effects on aquatic organisms remain to be systematically elucidated. In this study, the toxicological effects of MPs leachate (micro-sized polyethylene (mPE) and micro-sized polyvinyl chloride (mPVC) acceleratedly leached by UVA for 15, 90, and 180 days in seawater) on microalga Chlorella vulgaris in terms of cell growth inhibition, oxidative stress, and transcriptomes were investigated. The leachate components of MPs aged for 90 days were further identified to elucidate the corresponding toxicity mechanisms of MPs on microalgal cells. The results revealed that both leachates of mPE and mPVC inhibited cell growth and increased oxidative stress in C. vulgaris, accompanied by a growth inhibition rate to microalgal cells of 4.0%-36.2% and 7.1%-48.2%, respectively. At the same mass concentration, the toxicological effects on C. vulgaris followed the order of mPVC leachate > mPE > mPE leachate > mPVC, whereas MPs leaching time indicated no change in MPs leaching toxicity. Furthermore, the gene functions of "translation, ribosomal structure and biogenesis" were mostly affected by MPs leachate. Compared to mPE leachate and pure MPs, the stronger inhibitory effects of mPVC leachate on microalgal cells may be attributed to the fact that more substances were leached from the polymer of mPVC, including Zn, farnesol isomer a, 2,6-di-tert-butyl-4-methylphenol, and acetyl castor oil methyl ester. In summary, this study provides a better understanding of the ecotoxicological influences of MPs and MPs leachate, and offers a warning on the ecological risk caused by plastic additives.

Coating of chitosan on poly D,L-lactic-co-glycolic acid thymoquinone nanoparticles enhances the anti-tumor activity in triple-negative breast cancer.

Breast cancer is the second most common cancer around the world. Triple-negative breast cancer (TNBC) is characterized by the absence of three receptors: progesterone, estrogen, and human epidermal growth factor-2 receptor (HER2). Various synthetic chemotherapies have gained attention but they caused unwanted side effects. Therefore, some secondary therapies are now becoming famous against this disease. For instance, natural compounds have been extensively researched against many diseases. However, enzymatic degradation and low solubility remain a major concern. To combat these issues, various nanoparticles have been synthesized and optimized from time to time, which increases its solubility and hence therapeutic potential of a particular drug increases. In this study, we have synthesized Poly D,L-lactic-co-glycolic acid (PLGA) loaded thymoquinone (TQ) nanoparticle (PLGA-TQ-NPs) and then coated them by chitosan (CS) (PLGA-CS-TQ-NPs), which was characterized by different methods. Size of non-coated NPs was 105 nm with PDI value of 0.3 and the size of coated NPs was 125 nm with PDI value of 0.4. Encapsulation efficiency (EE%) and Drug loading (DL%) was found to be 70.5 ± 2.33 and 3.38 for non-coated and 82.3 ± 3.11 and 2.66 for coated NPs respectively. We have also analysed their cell viability against MDA-MB-231 and SUM-149 TNBC cell lines. The resultant, nanoformulations exhibit anti-cancerous activity in a dose and time-dependent manner for MDA-MB-231 and SUM-149 cell lines with an IC50 value of (10.31 ± 1.15, 15.60 ± 1.25, 28.01 ± 1.24) and (23.54 ± 1.24, 22.37 ± 1.25, 35 ± 1.27) for TQ free, PLGA-TQ-NPs and PLGA-CS-TQ-NPs respectively. For the first time, we have developed a nanoformulations of PLGA loaded TQ coated with CS NPs (PLGA-CS-TQ-NPs) against TNBC which led to their enhanced anti-cancerous effects.

Recent developments in microplastic contaminated water treatment: Progress and prospects of carbon-based two-dimensional materials for membranes separation.

Micro (nano)plastics pollution is a noxious menace not only for mankind but also for marine life, as removing microplastics (MPs) is challenging due to their physiochemical properties, composition, and response toward salinity and pH. This review provides a detailed assessment of the MPs pollution in different water types, environmental implications, and corresponding treatment strategies. With the advancement in nanotechnology, mitigation strategies for aqueous pollution are seen, especially due to the fabrication of nanosheets/membranes mostly utilized as a filtration process. Two-dimensional (2D) materials are increasingly used for membranes due to their diverse structure, affinity, cost-effectiveness, and, most importantly, removal efficiency. The popular 2D materials used for membrane-based organic and inorganic pollutants from water mainly include graphene and MXenes however their effectiveness for MPs removal is still in its infancy. Albeit, the available literature asserts a 70- 99% success rate in micro/nano plastics removal achieved through membranes fabricated via graphene oxide (GO), reduced graphene oxide (rGO) and MXene membranes. This review examined existing membrane separation strategies for MPs removal, focusing on the structural properties of 2D materials, composite, and how they adsorb pollutants and underlying physicochemical mechanisms. Since MPs and other contaminants commonly coexist in the natural environment, a brief examination of the response of 2D membranes to MPs removal was also conducted. In addition, the influencing factors regulate MPs removal performance of membranes by impacting their two main operating routes (filtration and adsorption). Finally, significant limitations, research gaps, and future prospects of 2D material-based membranes for effectively removing MPs are also proposed. The conclusion is that the success of 2D material is strongly linked to the types, size of MPs, and characteristics of aqueous media. Future perspectives talk about the problems that need to be solved to get 2D material-based membranes out of the lab and onto the market.

Membrane-processed honey samples for pollen characterization with health benefits.

Better processing techniques must be utilized widely due to the rising demand for honey. The most common honey processing techniques are applied to melissopalynomorphs to check the quality and quantity of valuable honey using microporous ultrafiltration membranes. It is essential to have the ability to selectively filter out sugars from honey using ultrafiltration. This study authenticated 24 honey samples using membrane reactors ultrafiltration protocol to describe the pollen spectrum of dominant vegetation. The purpose of this study was also to explore nutritional benefits as well as the active phytochemical constituents of honey samples. Honey samples were collected and labeled Acacia, Eucalyptus, and Ziziphus species based on plant resources provided by local beekeepers. A variety of honeybee flora was collected around the apiaries between 2020 and 2021. Honey analysis revealed that the pollen extraction of 24 bee foraging species belonging to 14 families. The honey membrane technology verified the identities of honey and nectar sources. Also, pollen identified using honey ultrafiltration membranes revealed dominant resources: Acacia spp. (69%), Eucalyptus spp. (52%) and Ziziphus spp. Honey filtration using a membrane technology classified 14 samples as unifloral, represented by six dominant pollen types. The absolute pollen count in the honey sample revealed that 58.33% (n = 14) belong to Maurizio's class I. Scanning ultrasculpturing showed diverse exine patterns: reticulate, psilate, scabrate-verrucate, scabrate-gemmate, granulate, perforate, microechinate, microreticulate, and regulate to fossulate for correct identification of honey pollen types. Honey ultrafiltration should be utilized to validate the botanical sources of honey and trace their biogeographic authenticity. Thus, it is imperative to look at the alternative useful method to identify the botanical origin of filtered honey. It is critical to separate honey from adulteration by a standardized protocol. Membrane technology has yielded significant outcomes in the purification of honey.

Impacts of microplastic-petroleum pollution on nutrient uptake, growth, and antioxidative activity of Chlorella vulgaris.

As one of the emerging pollutants, microplastics (MPs; <5 mm) can interact with co-contaminants such as petroleum in marine aquatic systems, and their combined toxicity has not been fully investigated. Therefore, this study focused on pollutants such as micro-sized polyethylene (mPE) and petroleum, aiming to explore their single and combined toxicities to microalga Chlorella vulgaris in terms of the cell growth, antioxidative enzymes, and nutrients utilization. The results showed that the MPs alone (particle sizes (i.e., 13, 165, 550 µm), concentrations (i.e., 0.01, 0.1, and 1 g/L), and aging degrees (i.e., aged for 0 d and 90 d under UVA)), and petroleum alone (5% water accommodated fraction, WAF), and their combinations (i.e., 5% WAF + 165 µm-0.1 g/L-aged 0 d mPE, 5% WAF + 165 µm-0.1 g/L-aged 90 d mPE) all posed toxicities risk to C. vulgaris, following an increase in oxidative stress. The cellular utilization of elements such as Fe, Si, Ca, and Mg was inhibited, whereas the uptake of Mn, NO3--N, and PO43--P increased as compared to the control experiments. Furthermore, the relationship between nutrients and growth indicators was analyzed using a structural equation model. The results indicated that Fe and Mn directly affected the indirect NO3--N absorption by C. vulgaris, which indirectly affected the dry cell weight (DCW) of the microalgae. The path coefficient of Fe and Mn affecting nitrate was 0.399 and 0.388, respectively. The absorption of N was the key step for C. vulgaris resist stress. This study provides a novel analysis of the effects of MPs on the growth of microalgae from the perspective of nutrient elements, thereby providing a useful basis for further exploration of the associated mechanisms.

Biochar application for remediation of organic toxic pollutants in contaminated soils; An update.

Bioremediation of organic contaminants has become a major environmental concern in the last few years, due to its bio-resistance and potential to accumulate in the environment. The use of diverse technologies, involving chemical and physical principles, and passive uptake utilizing sorption using ecofriendly substrates have drawn a lot of interest. Biochar has got attention mainly due to its simplicity of manufacturing, treatment, and disposal, as it is a less expensive and more efficient material, and has a lot of potential for the remediation of organic contaminants. This review highlighted the adverse impact of persistent organic pollutants on the environment and soil biota. The utilization of biochar to remediate soil and contaminated compounds i.e., pesticides, polycyclic aromatic hydrocarbons, antibiotics, and organic dyes has also been discussed. The soil application of biochar has a significant impact on the biodegradation, leaching, and sorption/desorption of organic contaminants. The sorption/desorption of organic contaminants is influenced by chemical composition and structure, porosity, surface area, pH, and elemental ratios, and surface functional groups of biochar. All the above biochar characteristics depend on the type of feedstock and pyrolysis conditions. However, the concentration and nature of organic pollutants significantly alters the sorption capability of biochar. Therefore, the physicochemical properties of biochar and soils/wastewater, and the nature of organic contaminants, should be evaluated before biochar application to soil and wastewater. Future initiatives, however, are needed to develop biochars with better adsorption capacity, and long-term sustainability for use in the xenobiotic/organic contaminant remediation strategy.

Targeted metabolomics reveals fatty acid abundance adjustments as playing a crucial role in drought-stress response and post-drought recovery in wheat.

Drought stress is one of the abiotic stresses restricting plant development, reproductive growth, and survival. In the present study, the effect of drought stress and post-drought recovery for the selected local wheat cultivar, Atta Habib, was studied. Wheat was grown for 16 days followed by drought stress for 7 days and allowed to recover for 7 days after the removal of the drought stress. Same-aged untreated plants were also grown as a control. The effect of drought stress and post-drought recovery on morphology (root length, shoot length, root weight, and shoot weight), enzymatic activity, and fatty acid profile were analyzed. The results showed that shoot weight (93.1 mg), root weight (85.2 mg), and shoot length (11.1 cm) decreased in the stressed plants but increased steadily in the recovered plants compared to the same-aged control plants, while root length showed a higher increase (14.0 cm) during drought stress and tended to normalize during the recovery phase (13.4 cm). The ascorbate peroxidase activity increased in the stressed plants (5.44 unit/mg protein) compared to the control, while gradually normalizing in the recovery phase (5.41 unit/mg protein). Gas chromatography coupled mass spectrometric analysis revealed abundance changes in important fatty acids, such as palmitic acid, stearic acid, oleic acid, linoleic acid, and linolenic acid. Palmitic acid (39.1%) and oleic acid (2.11%) increased in the drought-stressed plants, while a reduction in linoleic acid (6.85%) and linolenic acid (51.18%) was observed compared to the same-aged control plants, i.e., palmitic (33.71%), oleic (0.95%), linoleic (7.52%), and linolenic acid (55.23%). The results suggest that wheat tries to recover in the post-drought stage by repairing oxidative damage through ascorbate peroxidase, and by adjusting fatty acid abundances under drought stress and during the post-drought phase in an effort to maintain membranes' integrity and a suitable fat metabolism route, thus helping recovery. Targeted metabolomics may be further used to explore the role of other metabolites in the drought-stress response mechanism in wheat. Furthermore, this relatively little explored avenue of post-drought recovery needs more detailed studies involving multiple stress durations.

Targeting Microbial Biofouling by Controlling Biofilm Formation and Dispersal Using Rhamnolipids on RO Membrane.

Finding new biological ways to control biofouling of the membrane in reverse osmosis (RO) is an important substitute for synthetic chemicals in the water industry. Here, the study was focused on the antimicrobial, biofilm formation, and biofilm dispersal potential of rhamnolipids (RLs) (biosurfactants). The MTT assay was also carried out to evaluate the effect of RLs on biofilm viability. Biofilm was qualitatively and quantitatively assessed by crystal violet assay, light microscopy, fluorescence microscopy (bacterial biomass (µm2), surface coverage (%)), and extracellular polymeric substances (EPSs). It was exhibited that RLs can reduce bacterial growth. The higher concentrations (≥100 mg/L) markedly reduced bacterial growth and biofilm formation, while RLs exhibited substantial dispersal effects (89.10% reduction) on preformed biofilms. Further, RLs exhibited 79.24% biomass reduction while polysaccharide was reduced to 60.55 µg/mL (p < 0.05) and protein to 4.67 µg/mL (p < 0.05). Light microscopy revealed biofilm reduction, which was confirmed using fluorescence microscopy. Microscopic images were processed with BioImageL software. It was revealed that biomass surface coverage was reduced to 1.1% at 1000 mg/L of RLs and that 43,245 µm2 of biomass was present for control, while biomass was reduced to 493 µm2 at 1000 mg/L of RLs. Thus, these data suggest that RLs have antimicrobial, biofilm control, and dispersal potential against membrane biofouling.

Lockdown Amid COVID-19 Ascendancy over Ambient Particulate Matter Pollution Anomaly.

Air is a diverse mixture of gaseous and suspended solid particles. Several new substances are being added to the air daily, polluting it and causing human health effects. Particulate matter (PM) is the primary health concern among these air toxins. The World Health Organization (WHO) addressed the fact that particulate pollution affects human health more severely than other air pollutants. The spread of air pollution and viruses, two of our millennium's most serious concerns, have been linked closely. Coronavirus disease 2019 (COVID-19) can spread through the air, and PM could act as a host to spread the virus beyond those in close contact. Studies on COVID-19 cover diverse environmental segments and become complicated with time. As PM pollution is related to everyday life, an essential awareness regarding PM-impacted COVID-19 among the masses is required, which can help researchers understand the various features of ambient particulate pollution, particularly in the era of COVID-19. Given this, the present work provides an overview of the recent developments in COVID-19 research linked to ambient particulate studies. This review summarizes the effect of the lockdown on the characteristics of ambient particulate matter pollution, the transmission mechanism of COVID-19, and the combined health repercussions of PM pollution. In addition to a comprehensive evaluation of the implementation of the lockdown, its rationales-based on topographic and socioeconomic dynamics-are also discussed in detail. The current review is expected to encourage and motivate academics to concentrate on improving air quality management and COVID-19 control.

Elucidating the negatively influential and potentially toxic mechanism of single and combined micro-sized polyethylene and petroleum to Chlorella vulgaris at the cellular and molecular levels.

Although microplastics (MPs; <5 mm) may interact with co-contaminants (e.g., petroleum) in marine aquatic systems, little is known about their combined toxicity. Therefore, this study explored the toxicities and their mechanisms of micro-sized polyethylene (mPE) and their combination with petroleum to Chlorella vulgaris. The single MPs at various particle sizes, concentrations, and aging degree, single petroleum, and their combinations, were found to pose toxicities to C. vulgaris. This study also found the microcosm's microbial diversity changed. The microbial communities in the C. vulgaris biotopes were altered under exposure to mPE and petroleum, and were disturbed by external factors such as MPs particle size, concentration, aging time, and the combination with petroleum. Furthermore, as compared with the toxicity of petroleum on microalgal transcriptional function, mPE caused less toxic to C. vulgaris, and only impact the posttranslational modification, protein turnover, and signal transduction processes. Most importantly, mPE reduced petroleum toxicity in C. vulgaris via regulating the ABC transporter, eukaryotic ribosome synthesis, and the citrate cycle metabolic pathways. Overall, our findings could fundamentally provide insights into the joint ecotoxicological effects of MPs and petroleum, and highlight the potential risks of co-exsiting pollutants.

Next-generation graphene oxide additives composite membranes for emerging organic micropollutants removal: Separation, adsorption and degradation.

In the past two decades, membrane technology has attracted considerable interest as a viable and promising method for water purification. Emerging organic micropollutants (EOMPs) in wastewater have trace, persistent, highly variable quantities and types, develop hazardous intermediates and are diffusible. These primary issues affect EOMPs polluted wastewater on an industrial scale differently than in a lab, challenging membranes-based EOMP removal. Graphene oxide (GO) promises state-of-the-art membrane synthesis technologies and use in EOMPs removal systems due to its superior physicochemical, mechanical, and electrical qualities and high oxygen content. This critical review highlights the recent advancements in the synthesis of next-generation GO membranes with diverse membrane substrates such as ceramic, polyethersulfone (PES), and polyvinylidene fluoride (PVDF). The EOMPs removal efficiencies of GO membranes in filtration, adsorption (incorporated with metal, nanomaterial in biodegradable polymer and biomimetic membranes), and degradation (in catalytic, photo-Fenton, photocatalytic and electrocatalytic membranes) and corresponding removal mechanisms of different EOMPs are also depicted. GO-assisted water treatment strategies were further assessed by various influencing factors, including applied water flow mode and membrane properties (e.g., permeability, hydrophily, mechanical stability, and fouling). GO additive membranes showed better permeability, hydrophilicity, high water flux, and fouling resistance than pristine membranes. Likewise, degradation combined with filtration is two times more effective than alone, while crossflow mode improves the photocatalytic degradation performance of the system. GO integration in polymer membranes enhances their stability, facilitates photocatalytic processes, and gravity-driven GO membranes enable filtration of pollutants at low pressure, making membrane filtration more inexpensive. However, simultaneous removal of multiple contaminants with contrasting characteristics and variable efficiencies in different systems demands further optimization in GO-mediated membranes. This review concludes with identifying future critical research directions to promote research for determining the GO-assisted OMPs removal membrane technology nexus and maximizing this technique for industrial application.

Oil tea shell synthesized biochar adsorptive utilization for the nitrate removal from aqueous media.

Various reported methods are devoted to nitrate removal from water over the years. However, recently researchers are focusing on developing the materials that offer bio-based, non-toxic, inexpensive and yet an efficient solution for water treatment. In this study, removal of nitrates from water was carried out using oil tea shells (OTS) as a biosorbent. OTS powder was impregnated with ZnCl2 and biochar was prepared which was further treated with Cetyltrimethylammonium bromide (CTAB), a cationic surfactant. Both the Langmuir and the Freundlich models were satisfied by the nitrate adsorption of OTS biochar. The adsorption capacity was measured at 15.6 mg/g when the circumstances were at their best. The pseudo-second-order model provided an accurate description of the kinetic data that were collected from batch trials. The adsorption yield goes up when by usage of more adsorbent, but it goes down when adsorption start with a higher concentration of nitrate. The strong basis of analytical equipments were used to characterize the OTS biosorbent. According to the findings of the research, surface-modified OTS biochar is an effective material for the removal of nitrate from aqueous solutions. This means that it has the potential to be utilized in water treatment as an adsorbent that is both inexpensive and kind to the natural environment. Removal of heavy metals and other organic pollutants, both from groundwater and wastewater using OTS biochar seems like a promising and interesting area of study.